Page 2 of 3
Re: GTX 480 Core

Posted:
Sat Sep 18, 2010 3:46 am
by blazer
What is the speed when you go ?
./CUDA-Multiforcer -d 1 -l -h NTLM -f <FILE> --min=8 --max=8 -c charset/charsetfull -o <Output File> --threads 512 --blocks 15 -m 500
Re: GTX 480 Core

Posted:
Fri Sep 24, 2010 3:52 pm
by Angel
GTX480 box - ver 0.7 build from source!

NTLM (optimal perfomance - increasing --threads/--blocks/-m give me same result):
- Code: Select all
# ./multiforcer -l -h NTLM -f Hashes-NTLM-Full.txt --min=8 --max=8 -c charsets/all --threads 512 --blocks 60 -m 500
...
Done: 0.01% Step rate: 1711.5M/s Search rate: 23960.5M/sec
4 blazer with --blocks 15:
- Code: Select all
# ./multiforcer -l -h NTLM -f Hashes-NTLM-Full.txt --min=8 --max=8 -c charsets/all --threads 512 --blocks 15 -m 500
...
Done: 0.01% Step rate: 855.2M/s Search rate: 11972.6M/sec
MD5:
- Code: Select all
# ./multiforcer --threads 512 --blocks 60 -m 500 -h MD5 -f test -c charsets/all --min=8 --max=8
Cryptohaze.com CUDA Multiforcer (multiple hash brute forcer)
by Bitweasil
Version 0.70, length 0-14
Currently supported hash types: MD5 FASTMD5 MD4 FASTMD4 NTLM FASTNTLM SHA1 FASTSHA1
Hash type: MD5
CUDA Device Information:
Device 0: "GeForce GTX 480"
Number of cores: 120
Clock rate: 1.40 GHz
Memory (total): 1535 MB
Memory (free): 1358 MB
Single charset loaded.
Loading & sorting hashes. This may take a while.
Returning from sort.
Hashes loaded (1 hashes)
You may want to consider the FAST[hash] option if it exists.
Done with copy to constant
Launching kernel for password length 8
Done: 0.01% Step rate: 1117.7M/s Search rate: 1117.7M/sec
very nice software
oclHashcat give almost same speed (but don't have sources so it suck)
bvernoux gpu_md5_crack give me 400M/s and seems can't be tuned
tnks
Re: GTX 480 Core

Posted:
Mon Oct 04, 2010 1:38 pm
by re8el
Hello,
my setup:
ubuntu 10.10 x64
nvidia 256.53
gpu toolkit
opencl 1.0
wen running
/CUDA-Multiforcer-Linux-0.72# ./CUDA-Multiforcer -d 1 -l -h NTLM -f test_hashes/Hashes-NTLM-Full.txt --min=8 --max=8 -c charsets/charsetlowernumeric -o output.file --threads 512 --blocks 60 -m 500
i get this error:
CUDA Device Information:
Device 1: ""
Number of cores: 0
Clock rate: 0.00 GHz
Performance Number: 0
Note: Performance number is clock in mhz * core count, for comparing devices.
Single charset loaded.
Loading & sorting hashes. This may take a while.
Hashes loaded (14 hashes)
You may want to consider the FAST[hash] option if it exists.
Cuda error: invalid device ordinal.
any ideia?
Best Regards
re8el
Re: GTX 480 Core

Posted:
Mon Oct 04, 2010 2:36 pm
by Bitweasil
You don't have CUDA installed, or it's not running correctly. Try running the multiforcer as root once, or start X11 - you may not have /dev/nvidia set up properly.
Re: GTX 480 Core

Posted:
Wed Oct 06, 2010 5:53 am
by Sc00bz
It looks like you are trying to use a device that doesn't exist. -d specifies which device to use.
./CUDA-Multiforcer -d 1 -l -h NTLM -f test_hashes/Hashes-NTLM-Full.txt --min=8 --max=8 -c charsets/charsetlowernumeric -o output.file --threads 512 --blocks 60 -m 500
Try:
./CUDA-Multiforcer -l -h NTLM -f test_hashes/Hashes-NTLM-Full.txt --min=8 --max=8 -c charsets/charsetlowernumeric -o output.file --threads 512 --blocks 60 -m 500
Re: GTX 480 Core

Posted:
Fri Oct 08, 2010 8:04 am
by re8el
Hi
Sc00bz, this time it run.
Weird with no -d or with -d 0 it runs ok. I have the idea that i could use all the 480 cores of the board, but it's using only 120 !?!??!
Is this results what to be expected from this card?
- Code: Select all
cuda-tools/CUDA-Multiforcer-Linux-0.72# ./CUDA-Multiforcer -l -h NTLM -f test_hashes/Hashes-NTLM-Full.txt --min=8 --max=8 -c charsets/charsetlowernumeric -o output.file --threads 512 --blocks 60 -m 500
Cryptohaze.com CUDA Multiforcer (multiple hash brute forcer)
by Bitweasil
Version 0.72, length 0-14
Currently supported hash types: MD5 FASTMD5 MD4 FASTMD4 NTLM FASTNTLM SHA1 FASTSHA1
Hash type: NTLM
CUDA Device Information:
Device 0: "GeForce GTX 480"
Number of cores: 120
Clock rate: 1.51 GHz
Performance Number: 22680
Note: Performance number is clock in mhz * core count, for comparing devices.
Single charset loaded.
Loading & sorting hashes. This may take a while.
Hashes loaded (14 hashes)
You may want to consider the FAST[hash] option if it exists.
Launching kernel for password length 8
Done: 19.20% Step rate: 1669.7M/s Search rate: 23375.5M/sec
NTLM:8846F7EAEE8FB117AD06BDD830B7586C:password:0x70617373776f7264
Done: 99.99% Step rate: 1663.7M/s Search rate: 23291.6M/sec
------------------------------------------
Compute done: Reference time 1697.1 seconds
Stepping rate: 1662.3M MD4/s
Search rate: 23272.6M NTLM/s
Re: GTX 480 Core

Posted:
Fri Oct 08, 2010 6:23 pm
by Bitweasil
I have no idea why it's only seeing 120 cores. You have the latest drivers installed?
I currently don't have any Fermi devices, so I can't really test it on them. The *theory* of the donate button on the front page was to cover some of my hardware costs & fund GPUs, but that's not working so well.

Re: GTX 480 Core

Posted:
Sat Oct 09, 2010 7:00 am
by Sc00bz
It's definitely using all 480 cores because it's getting a step rate of 1663.7M/s. So don't worry the only thing wrong is the status message. It looks like the performance number is wrong too.
- Code: Select all
Number of cores: 120
Clock rate: 1.51 GHz
Performance Number: 22680
Note: Performance number is clock in mhz * core count, for comparing devices.
Single charset loaded.
1,510 * 120 = 181,200 != 22,680
9800 GTX+:
- Code: Select all
Number of cores: 128
Clock rate: 1.84 GHz
Performance Number: 29376
1,840 * 128 = 235,520 != 29,376
Re: GTX 480 Core

Posted:
Sat Oct 09, 2010 11:03 am
by re8el
I have the driver 256.53 with cudatoolkit 3.1 ubuntu9.10 with grucompsdk 3.1
It's running on a ubuntu 10.10 x64 and its a zotac gtx 480 amp.
this is really wierd...
Re: GTX 480 Core

Posted:
Mon Oct 11, 2010 4:05 pm
by Bitweasil
I'll take a look at that. I might be wrapping it into a char or something.
... anyone got a shell box with a 480 in it I can use?